Skip To Content

Project JSON

Projects are typically configured in the ArcGIS QuickCapture designer using a graphical interface, but you can also change the project's JSON code.

When editing the project's JSON, you can modify the following properties:

  • userInput—User-supplied string that can be used to populate attributes of a record
  • preferences—Applicable to all records captured in a project
  • basemap—Map displayed when reviewing data
  • dataSources—Lists the feature layers used by buttons in the project
  • templateGroups—Represents a group of buttons
  • templates—Represents a button.
    • captureInfo—How data is captured when a button is selected
    • displayInfo—How a button will look
    • fieldInfo—The attribute values that will be captured for the record
    • cameraInfo—How photos are captured for the record

Some of these properties are arrays of additional properties. The following subsections describe details of the property arrays.

Preferences

The following properties are applicable to the project or all records captured in a project:

PropertyDescriptionField type

backgroundColor

Project background color as an HTML hexadecimal value.

String

splitScreen

Show the buttons and map side by side.

Boolean

horizontalAccuracyWarning

A decimal value, in meters, defining a recommended threshold above which the horizontal accuracy is no longer considered sufficient. This is used to change the color of the horizontal accuracy display on the project page. Accepts maximum value of 999 meters.

Decimal

horizontalAccuracyError

A decimal value, in meters, defining a required threshold above which the horizontal accuracy is no longer considered sufficient. This is used to prevent the user from capturing records if the threshold is not met. Accepts maximum value of 999 meters.

Decimal

allowEditLocation

Allow location of a point to be updated, within a limited time after capture.

Boolean

distanceThreshold

The minimum movement distance in meters from the last vertex or point captured before a new vertex or point can be captured. The default distance is 5 meters.

Decimal

undoThreshold

The time in seconds after capture in which records can be deleted or have their location updated.

Decimal

adminEmail

Specifies the recipient of data recovery files generated by the mobile app.

String

While thresholds can be set for both horizontalAccuracyWarning and horizontalAccuracyError, the horizontalAccuracyWarning value must always be lower than the error. For example, if you set a recommended horizontal accuracy of 10 meters and a required horizontal accuracy of 30 meters, and then your device returns an accuracy of 20 meters, you will see a warning. If your device returns an accuracy of 40 meters, you will be unable to capture a record.

The following example shows preferences set with a gray background, the recommended horizontal accuracy of 10 meters, no distance threshold, and an admin email of quickcapture@esri.com:

{
   "basemap":{

   },
   "dataSources":[

   ],
   "itemId":"",
   "preferences":{
      "splitScreen":false,
      "backgroundColor":"#f3f3f4",
      "horizontalAccuracyError":null,
      "horizontalAccuracyWarning":10,
      "distanceThreshold":null,
      "undoThreshold":10,
      "adminEmail":"quickcapture@esri.com"
   },
   "templateGroups":[

   ],
   "userInputs":[

   ],
   "version":""
}
Note:

Decimal values must use a period as the decimal separator, and thousand separators should not be used. Commas are not accepted in the JSON editor.

Basemap

By default, the basemap of a new project will match the default basemap of the organization. When signed in to the app with an organization account, the user will see the current default organization basemap in that project. If the user is signed out of the app, the Esri World Topographic map is displayed.

The following properties are used to identify a basemap to be used in a project:

PropertyDescriptionField type

type

WebMap, MMPK, VTPK, or TPK. When null, Esri World Topographic map is used.

String

itemId

The item ID of the basemap.

String

useDefaultBasemap

True (default) or false.

Boolean

Project authors can override the default behavior by selecting an online or offline map of their choice. If useDefaultBasemap is set to false and the itemId is null, the project will use the Esri World Topographic map.

The following example shows a required web map that is only available to the user who downloaded it:

{
   "basemap":{
      "type":"WebMap",
      "itemId":fae788aa91e54244b161b59725dcbb2a,
      "useDefaultBasemap":false,
      "required":true,
      "zoomLevel":null
   }
}

If you want to show users the previously submitted data on a map in your project, you can configure a web map that contains the project data and nominate it as the basemap.

  • The web map should at least contain the same layers as the project. Other layers can also be included.
  • The symbology defined in the web map will be used to symbolize the sent features.
  • Data captured on the device that has not been sent will be symbolized using the default QuickCapture symbology. For example, points will be symbolized with the blue marker.

Note:

Only maps with Web Mercator spatial reference are supported.

Data sources

The following properties are used to identify a feature layer in a project:

PropertyDescriptionField type

dataSourceId

A unique number assigned by QuickCapture to this project to identify this layer in the array. This is not the index of the layer in the feature service. One project can have layers from different feature services.

Integer

featureServiceItemId

The item ID of the feature service that contains this layer.

String

URL

The URL of the feature layer REST endpoint (…/FeatureServer/0). This URL must include the full URL, down to the layer index.

String

One or more data sources can be listed in the dataSource property. In the following example, two layers are listed that come from two different feature services.

{
   "basemap":{

   },
   "dataSources":[
      {
         "featureServiceItemId":"1f683747c06c4a7e9843a477b2ab41e0",
         "dataSourceId":0,
         "url":"https://services1.arcgis.com/e7dVfn25KpfE6dDd/arcgis/rest/services/LayerOne/FeatureServer/0"
      },
      {
         "featureServiceItemId":"2b313747c06c4a7e9843a477b2ab41e0",
         "dataSourceId":1,
         "url":"https://services1.arcgis.com/b45KpfE6dEf121/arcgis/rest/services/LayerTwo/FeatureServer/1"
      }
   ],
   "itemId":"",
   "preferences":{

   },
   "templateGroups":[

   ],
   "userInputs":[

   ],
   "version":""
}

Template groups

The following properties are used to define how a group of buttons is displayed in a project. Each group of buttons can use different properties.

PropertyDescriptionField type

name

Name of the group.

String

label

Label shown in the project for the group.

String

columns

Number of columns in the group.

Integer

columnSpacing

Spacing between the columns.

Decimal

rowSpacing

Spacing between the rows.

Decimal

backgroundColor

Background color of the group as an HTML hexadecimal value.

String

outlineColor

Outline color of the group as an HTML hexadecimal value.

String

expanded

Default is true.

Boolean

labelColor

Color of the group label as an HTML hexadecimal value.

String

Template

The following properties are used to identify the feature layer that's related to a button:

PropertyDescriptionField type

id

The UUID for the button.

Text

dataSourceId

References the target layer where data is stored. The ID refers to a data source in the data sources array.

Integer

captureInfo

The following properties describe how data is to be captured:

PropertyDescriptionField type

exclusivityGroup

A value defining an exclusivity group. All templates with the same value are grouped, with exclusive set to true. When set, only one button with the value can be active at a time.

Text

type

esriGeometryPoint, esriGeometryPolyline, or esriGeometryPolygon.

String

continuous

Always true for lines and polygons.

Boolean

displayInfo

The following properties describe how a button will look:

PropertyDescriptionField type

label

The label on the button.

String

shape

Rectangle, rounded, or circle.

String

size

Small, medium, or large.

String

color

Color of the button background as an HTML hexadecimal value.

String

outlineColor

Color of the button outline as an HTML hexadecimal value.

String

outlineWidth

Width of the button outline.

Decimal

labelColor

Color of the button label as an HTML hexadecimal value.

String

labelFontSize

Font size for the button label.

Integer

labelFontWeight

Bold or regular.

String

shadowColor

When no value is provided, the app will use the same backgroundColor value as the group. This means the shadow will not be visible.

String

image

Image to be shown with the button in PNG, JPG, or SVG format. All images are stored as resources of the item in the images folder.

String

fieldInfo

The following properties describe attribute information that is entered into the feature service when a button is tapped. Typically, a project author will use predefined text or field variables to populate fields of the record collected.

PropertyDescriptionField type

fieldName

Name of the field.

String

value

Can contain any of the properties listed in this topic.

String

cameraInfo

The following properties describe how photos can be captured and saved in a project. By default, if you enable photos to be captured for a button, the photo is always required. You can make photo capture optional by changing the required property to be false and specify photo quality by changing the imageSize property.

PropertyDescriptionField type

mode

None (default)—No photo is associated with the feature.

Automatic—Photo is taken without confirmation from user as soon as button is selected.

Manual—Camera preview is displayed and user controls capture of photo.

String

imageSize

Small (320 pixels on longest edge), medium (640 pixels on longest edge), large (default, 1280 pixels on longest edge), or unrestricted (no size limit). If the image is resized by the app, the aspect ratio of the captured image will be maintained.

String

required

True (default) or false.

Boolean

In the following example, an optional photo is taken without confirmation.

{
   "mode":"automatic",
   "imageSize":"unrestricted",
   "required":true
}

notificationsInfo

The following properties are used to configure notifications within a project. Currently, the only supported notification is a webhook.

PropertyDescriptionField type

id

Unique ID of the webhook (within the project).

String

name

Name of the webhook.

String

active

True or false (default).

Boolean

created

Date and time when the webhook was created.

Date

modified

Date and time when the webhook was last modified.

Date

events

Event type that triggers the webhook. Only the addData event is supported.

String

targetLayerUrl

Feature service layer (including layer index) that the webhook has been configured against. The addData events will be triggered by updates to this layer.

String

webhookUrl

Webhook URL that the payload will be sent to.

String

includePortalInfo

True (default) or false.

Boolean

includeProjectInfo

True (default) or false.

Boolean

includeServiceRequest

True (default) or false.

Boolean

includeServiceResponse

True (default) or false.

Boolean

In the following example, a single webhook is shown, but more than one can be configured in a single project.

"notificationsInfo": {
    "webhooks": [
      {
        "active": true,
        "created": 1502880915000,
        "events": [
          "addData"
        ],
        "id": "ByCjvHpPz",
        "includePortalInfo": true,
        "includeProjectInfo": true,
        "includeServiceRequest": true,
        "includeServiceResponse": true,
        "includeUserInfo": true,
        "modified": 1502881754000,
        "name": "Display name",
        "targetLayerUrl": "https://<serviceurl including layer index>",
        "webhookUrl": "https://<webhookserviceurl>"
      }
    ]
  }

Field variables

When using these variables in the JSON editor, you must enter the variable name in the format of ${variable_name}. In the following example, the username variable is assigned to a field named NameOfUser.

{
   "fieldName":"NameOfUser",
   "value":"${username}"
}

User input variable

The userInput variable value is populated by the app user and can be applied to one or more buttons in a project. The app user enters the value; however, the project author must define the buttons and fields to which the variable will apply.

PropertyDescriptionField type

Id

Unique ID of the user input.

String

label

The label is displayed in the mobile app to describe the expected input value from the end user. For example, the label might be RouteNo, CostCenter, or RouteNo-CostCenter.

String

fieldType

The type of field to which the user input value can be written. Options are limited to esriFieldTypeString, esriFieldTypeDouble, and esriFieldTypeInteger.

String

required

Specifies whether the user input value must be provided by the end user of the mobile app before (project mode) or after (button mode) a button can be pressed.

Boolean

domain

Controls user input and is limited to a numerical range (range), list of predefined values (codedValue), or text input, optionally using an input mask (userDefined).

String

mode

Controls whether the user is prompted for input when the project is launched (project) or when a button is pressed (button).

String

multiline

Allows entry of multiple lines of text. This is only applicable when domain is userDefined.

Boolean

To learn when to use each mode, see Project user input variable or Button user input variable.

It is recommended that domains be managed in the feature service. The web designer reads domain information directly from the feature service to create the user input. Domain information is not automatically written into the project JSON.

The mobile app reads domain information directly from the feature service and stores it locally on the device. If you add or modify domain values in the feature service, you need to resave the project in order to prompt the user to update the project and see the changes.

Caution:

A project author can choose to manually define domain information directly with the project JSON. This will override anything that is read from the feature service. It is the responsibility of the author to ensure that any values defined are within the limits of those defined in the feature service. An example of when you might choose to do this is when you want to define a subset of coded values in the project from a much longer list in the feature service.

The following example shows how a range domain user input is defined:

{
   "userInputs":[
      {
         "id":"001",
         "label":"Enter route number",
         "fieldType":"esriFieldTypeInteger",
         "required":true,
         "mode":"project",
         "domain":{
            "type":"range",
            "name":"route no",
            "range":[
               1,
               100
            ]
         }
      }
   ]
}

The following example shows how a codedValue domain user input is defined:

{
   "userInputs":[
      {
         "id":"001",
         "label":"Enter class",
         "fieldType":"esriFieldTypeString",
         "required":true,
         "mode":"project",
         "domain":{
            "type":"codedValue",
            "name":"Class",
            "codedValues":[
               {
                  "name":"Principle",
                  "code":"Principle"
               },
               {
                  "name":"Classified (Non-principle)",
                  "code":"Classified"
               },
               {
                  "name":"Unclassified",
                  "code":"Unclassified"
               }
            ]
         }
      }
   ]
}

The following example shows how a userDefined domain user input is defined:

{
   "userInputs":[
      {
         "id":"001",
         "label":"Enter route number",
         "fieldType":"esriFieldTypeString",
         "required":true,
         "mode":"button",
         "domain":{
            "type":"userDefined",
            "name":"route no",
            "inputMask":"9999",
            "multiline":false,
            "hint":"Enter a four digit route id"
         }
      }
   ]
}

Once userInput is defined, the project author can assign it for use in a field. The following shows userInput with an ID of 001 being used to populate a field named routeNo:

{
   "fieldInfos":[
      {
         "fieldName":"routeNo",
         "value":"${userInput:001}"
      }
   ]
}

Input mask

An input mask defines the format for data entry by using characters and symbols as part of a user input variable. When you apply an input mask to a user input variable, values entered by the user must follow the specific pattern defined by the input mask.

To apply an input mask to your user input variable, define the mask in the userInputs.domain.inputMask property.

See Input mask for a list of all masks and examples that can be applied to user input variables.